The drug is intended for gasoline and diesel engines. Effectively cleaned combustion chambers and piston rings from carbon deposits, high-temperature lacquers and coal deposits. Provides increased engine power, compression alignment on the cylinders. Increases vehicle dynamics. Eliminates detonation and ignition. Reduces fuel and oil consumption.

Request:
1. Install the engine on a horizontal platform and drive the engine to operating temperature. 2. Stop the engine, unscrew the spark plugs, injectors or glow plugs (diesel engine). 3. The drug through the hole for the candle 100-110 ml of the drug in each cylinder and leave for 40-60 minutes. You can twist the plugs to provide a “vapor phase” in the combustion chambers. 4. Break the high voltage circuit, remove the central wire from the ignition distributor for the cellular ignition system or connect the Hall sensor connector, etc. For machines with a contactless ignition system, excluding the possible ignition of the preparation. 5. After the specified time has elapsed (step 3), release the process opening. Rotate the crankshaft with the starter 2-3 times within 3-7 seconds when the accelerator pedal is fully depressed (gas). 6. Screw the spark plugs (nozzles) and adjust the high voltage circuit. 7. Start the engine and let it say goodbye for 10-15 minutes (at high speed, but not more than 2000 rpm). 8. Change the engine oil in the usual way, replace the oil filter.