Combustion Chamber Cleaner - engine decoupling

Wynn's Combustion Chamber Cleaner is designed to dissolve and remove carbon deposits from the combustion chamber (de-coal). Helps to restore compression

Restores the mobility of the "stuck" piston rings.
Restores compression and valve performance.
Prevents engine detonation.
Removes carbon deposits from intake valves, as well as tar deposits and deposits
intake manifold.
Safe for catalysts.

For all gasoline engines.
Can be used with MultiServe. Allowed to use
medical dropper with dispenser.

To warm up the engine.
1st method:
Connect the engine vacuum hose to the medical dropper.
Make sure the black adapter tap is closed. Start the engine and
increase speed to 1 500 rpm
Open the tap of the adapter and adjust so that the engine
worked at a minimum stable speed.
When the bank gets empty immediately stop the engine. Remove the dropper and collect
disconnected parts.
Wait 10 minutes until the substance is absorbed into the carbon.
Start the engine. Drive a car for at least 5 km. or
let the engine run for 5 minutes at different speeds (up to 2/3
maximum allowable).

2nd Way:
Pour the product into the tank Multiserve or EnviroPurge.
Disconnect the air nozzle.
Insert the spray cone into the disconnected nozzle.
Start the engine.
Start the air intake cleaning procedure.
After the end of the procedure. Turn off the device and connect all
nozzles in place.
Start the engine. Drive a car for at least 5 km. or
let the engine run for 5 minutes at different speeds (up to 2/3
maximum allowable).
Adjust the engine according to the manufacturer’s instructions.

IMPORTANT!
For all the ways.
Do not add to the gas tank. After application there is no need to replace
engine oil and spark plugs.

Note:
Does not eliminate mechanical damage.