Novol Repair Kit BUMPER FIX Filler 200g Putty Plastic Car Trim Grey

Description

NOVOL Putty "Bumper Fix", volume 200g.

Features:

BUMPER FIX NOVOL - putty for plastics. It has high elasticity and excellent adhesion to most plastics (with the exception of polyethylene and teflon). It also has satisfactory adhesion to polypropylenes, which makes it possible to putty on unprimed surfaces.

It can be used on the following types of surfaces:
- plastic surfaces (except PE and PTFE),
-steel,
-galvanized steel
-aluminum,
- two-component acrylic primers,
- old varnish coatings.

Attention! Do not apply directly to primer that increases adhesion, reactive primers (wash primery), one-component acrylic and nitrocellulose products.

Surface preparation:
- degrease the plastic surface, wipe with a special material (e.g. Scotch Brite Fine, Scotch Brite Very Fine) and degrease again with a Silicone Remover;
- degrease the steel surface, grind it with the “dry” method Р80 - Р120 and degrease it again;
- degrease the aluminum surface, mat with a special material (e.g. Scotch Brite Fine, Scotch Brite Very Fine) and degrease again;
- degrease the galvanized surface, mat with a special material (e.g. Scotch Brite Fine, Scotch Brite Very Fine) and degrease again;
- degrease the soil, sand it using the “dry” method P220 - P280 and degrease it again;
- degrease the old lacquer coating, sand it dry using a P220 - P280 dry method and degrease again.

NOVOL was founded in 1978. Over the next decades, it has evolved from a small enterprise into the largest manufacturer of car paint systems. The production, which was based on high-quality technologies and raw materials, allowed us to quickly expand our trading offer and the circle of business partners.

Characteristics:
Volume: 200g.
Country of manufacture: Poland
Manufacturer: NOVOL