$15.70
On Hold
ANTI-TAPE. Sticker and adhesive remover, spray 210 ml ASTROHIM
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
ANTI-TAPE. Sticker and adhesive remover, spray 210 ml ASTROHIM
Many of us had to remove various stickers. Someone is more lucky - the sticker is easily and completely removed, which is extremely rare, for someone a little less - the tightly glued label can hardly be peeled off, leaving traces of glue. Particular difficulty arises when removing stickers from the car paintwork, which is easy to damage by applying excessive force or using various solvents. Fortunately, modern chemicals can almost instantly get rid of ill-fated stickers without damaging the surface.
Features of ANTI-TAPE. Sticker and adhesive remover ASTROhim:
It acts quickly, dissolving the adhesive base of the sticker, after which it is easily removed and leaves no residue.
Removes adhesive residue from adhesive tape and other adhesive tapes.
Suitable for use on any surface: glass, metal, plastic, ceramic, including painted.
Does not drain when processing vertical surfaces.
It does not cause corrosion.
Suitable for exterior and interior use.
It can be used both for a car and in everyday life.
Recommendations for use
Shake the bottle vigorously before use.
The composition is applied to a surface previously cleaned of loose dirt at an ambient temperature of + (10-25) ° C.
While holding the balloon in an upright position, apply the product on the surface to be treated from a distance of 15-20 cm. When processing large surface areas, periodically shake the balloon.
To remove the sticker, apply the product on its upper part and edges, leave for 2-3 minutes. Then pick up the edge of the sticker and, slowly lifting it, spray the composition under the sticker.
To remove a thick layer of glue from the stickers, it is necessary to apply the product on the place to be treated and after 2-3 minutes remove the glue with a plastic or rubber spatula.
Repeat processing if necessary.
At the end of work, remove surplus funds with a clean cloth.
Recommendations
Before surface treatment, it is recommended to test the effect of the composition and the resistance of the treated surface to it in a small inconspicuous area.
Consumption
Average consumption - 1 cylinder per 1 sq.m.
Many of us had to remove various stickers. Someone is more lucky - the sticker is easily and completely removed, which is extremely rare, for someone a little less - the tightly glued label can hardly be peeled off, leaving traces of glue. Particular difficulty arises when removing stickers from the car paintwork, which is easy to damage by applying excessive force or using various solvents. Fortunately, modern chemicals can almost instantly get rid of ill-fated stickers without damaging the surface.
Features of ANTI-TAPE. Sticker and adhesive remover ASTROhim:
It acts quickly, dissolving the adhesive base of the sticker, after which it is easily removed and leaves no residue.
Removes adhesive residue from adhesive tape and other adhesive tapes.
Suitable for use on any surface: glass, metal, plastic, ceramic, including painted.
Does not drain when processing vertical surfaces.
It does not cause corrosion.
Suitable for exterior and interior use.
It can be used both for a car and in everyday life.
Recommendations for use
Shake the bottle vigorously before use.
The composition is applied to a surface previously cleaned of loose dirt at an ambient temperature of + (10-25) ° C.
While holding the balloon in an upright position, apply the product on the surface to be treated from a distance of 15-20 cm. When processing large surface areas, periodically shake the balloon.
To remove the sticker, apply the product on its upper part and edges, leave for 2-3 minutes. Then pick up the edge of the sticker and, slowly lifting it, spray the composition under the sticker.
To remove a thick layer of glue from the stickers, it is necessary to apply the product on the place to be treated and after 2-3 minutes remove the glue with a plastic or rubber spatula.
Repeat processing if necessary.
At the end of work, remove surplus funds with a clean cloth.
Recommendations
Before surface treatment, it is recommended to test the effect of the composition and the resistance of the treated surface to it in a small inconspicuous area.
Consumption
Average consumption - 1 cylinder per 1 sq.m.