7 minute. Radiator Flush

If the cooling system is dirty, a single fluid change will not be enough. To restore its efficiency, it is necessary to remove the accumulated scale and deposits. This can be done gently and quite effectively, using TM Nekker radiator flushing fluid “7-minute”.

Using the product significantly improves work efficiency and extends the life of the cooling system, helps to avoid possible breakdowns arising from overheating of the engine.

Mode of application
Cleaning the vehicle radiator from contamination must be carried out when replacing the coolant in the system. First, the motor must be warmed up to operating temperature and turned off. Then, one cylinder of the means for flushing the 7-minute engine cooling system is poured into the radiator tank. After this, it is required to start the engine and let it idle for seven to ten minutes, not forgetting to turn on the heating of the car interior. Then the engine can be turned off, and the coolant along with the preparation for washing the radiator of the stove should be drained from the system, rinsed with water. After this, a new coolant is poured.