Additive in motor oil. Asset Standard

A tribotechnical composition (or additive) for restoring and extending the life of non-accelerated gasoline engines with a volume of up to 1.6 liters, maintaining performance characteristics: compression, power, throttle response, effective fuel consumption. The use of the tribo composition can reduce the risk of scoring, protect the engine in case of emergency oil loss.

The tribotechnical composition does not react with motor oils and their packages of chemical additives, does not change their properties and characteristics.

APPLICATION PROCEDURE

The composition "Active Standard" is added to the engine oil. Before use, the contents of the vial must be thoroughly shaken so that the active component in the form of a gray-green precipitate disperses throughout the entire volume of the vial. It does not require any special knowledge or tools.

Complete processing will require 2 or 3 bottles.

Adding the composition to the engine oil can be done by any car owner on any car independently. However, it is important to pay attention to the paragraphs of the instructions attached to each bottle of the composition so that it works as efficiently as possible.

The standard processing procedure is as follows:

A bottle of the composition is added to the oil about 1000 kilometers before the planned regular oil change.
Another bottle of the composition is added after replacement already in fresh oil and works there throughout the interservice run.
For vehicles with a mileage of more than 50,000 kilometers, in order to achieve maximum recovery effect, it is strongly recommended to add the composition for the third time after the next oil change.