MOTOTEC 2 for two-stroke motorcycles, mopeds ATV and other motor vehicles
Suprotec "MOTOTEC 2" additive to oil, engine restorer, compression repair two-stroke engine:

boat motor, gasoline portable generator, motor bike, moped, chainsaw, lawn mower, motorcycle, etc



Tribological composition «MOTOTEC 2" from the company SUPROTEC for restoration and protection from wear two-stroke mopeds, ATVs and other motor vehicles, including engines with separate lubrication system.

quantity: 1 bottle = 100ml / 3,38 OZ

The effect of Suprotec "MOTOTEC 2"

The protective layer SUPROTEC restores the size and geometry of worn parts, optimizes the gaps in the friction pairs keeps denser oil layer. All this leads to a reduction of friction losses by 15-20% and, respectively, the following improvements in the operation of the engine:

Increasing capacity - optimization clearances cylinder-piston group that increases compression, improves the combustion air-fuel mixture, which leads to an increase in capacity.
Reduction of vibration and noise - the normalization of weight components by cleaning, optimizing gaps and denser layer of oil reduce unwanted vibration and noise in the engine.
preventive effects

The protective layer reduces wear of the friction surfaces and substantially prolongs the life of the relevant parts.


Function and operating principle "MOTOTEC 2"
Tribological composition «MOTOTEC 2" generates two actions: cleans the surface friction and activates the process of accession to them metal microparticles contained in the working oil. These particles form a kind of protective layer that:

It is more durable, compared to most parts of the metal surface;
holds a denser layer of oil;
The protective layer is formed as long as the temperature, pressure, vibration and other parameters will not come to an optimum state, then the process of forming the layer is automatically stopped.


The composition produces effects on all the surface friction in the piston-cylinder group and a crank mechanism.

Instructions for use SUPROTEC "MOTOTEC 2"
Composition "MOTOTES 2" is added to the working oil on the engine the following procedure:

Warm up the engine to operating temperature
Stop the engine.
Stir the vial with the composition so that the sediment at the bottom distributed throughout the liquid volume.
Pour part: If the lubrication system is separate system - Fill half the bottle into the oil tank. If the overall lubrication system - Pour the composition into the fuel tank at the rate of 5 ml of composition per 1 liter of fuel.
Immediately after making the formulation, start the engine and let it run for 10-15 minutes.

To maintain the performance of the engine is recommended subsequent treatment after 30-40 hours of operation.