$24.06
On Hold
Clean oil system gasoline and diesel deposits: varnish, carbon deposits, sludge VMPAUTO 100ml
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Raskoksoil Valera Designed to clean the oil system of gasoline and diesel ICE from low and high temperature carbon deposits: varnish, carbon deposits, sludge.
Dissolves deposits without forming abrasive particles
Better removes oil residues from oil channels
Discovers oil scraper rings
Safe for engines with aluminum sumps
Contains no ammonia, ammonia
Effective for deoxidation of oil channels, oil scraper rings,
cleaning hydraulic lifters and other ICE elements in contact with oil indiscriminately ICE.
The composition dissolves sparingly soluble substances in oil, excluding the possibility of blockage.
oil drainage channels and scuffing with abrasive particles.
stand the composition at room temperature for 6 hours before use
Check the oil level and choose the correct dosage of the composition. A bottle of 100 ml is designed for 4-5 liters of oil. With a different amount of oil, the dosage is not more than 25 ml per 1 liter of oil.
Warm up the engine to operating temperature, shut off, open the oil filler neck.
Pour the recommended dosage in old oil or new, flushing oil.
For effective cleaning of highly contaminated internal combustion engines, it is necessary to keep the engine speed in the range of 1700-2300 rpm for 20-25 minutes.
Switch off the engine and allow to cool to safely drain the used oil.
After use in ICE with a painted sump, it is necessary to verify the integrity of the paintwork, if necessary, remove the paint.
Replace oil filter and oil.
Dissolves deposits without forming abrasive particles
Better removes oil residues from oil channels
Discovers oil scraper rings
Safe for engines with aluminum sumps
Contains no ammonia, ammonia
Effective for deoxidation of oil channels, oil scraper rings,
cleaning hydraulic lifters and other ICE elements in contact with oil indiscriminately ICE.
The composition dissolves sparingly soluble substances in oil, excluding the possibility of blockage.
oil drainage channels and scuffing with abrasive particles.
stand the composition at room temperature for 6 hours before use
Check the oil level and choose the correct dosage of the composition. A bottle of 100 ml is designed for 4-5 liters of oil. With a different amount of oil, the dosage is not more than 25 ml per 1 liter of oil.
Warm up the engine to operating temperature, shut off, open the oil filler neck.
Pour the recommended dosage in old oil or new, flushing oil.
For effective cleaning of highly contaminated internal combustion engines, it is necessary to keep the engine speed in the range of 1700-2300 rpm for 20-25 minutes.
Switch off the engine and allow to cool to safely drain the used oil.
After use in ICE with a painted sump, it is necessary to verify the integrity of the paintwork, if necessary, remove the paint.
Replace oil filter and oil.