CRC OXIDE CLEAN & PROTECT PRO 250ml

CRC OXIDE CLEAN & PROTECT PRO is an oil for cleaning electrical contacts. Used to restore corroded electrical contacts. In addition to components that dissolve corrosion products, the aerosol contains a mixture of solvents that also remove dirt and tarred oils and greases. In fact, the problems arising with electrical contacts are caused not only by corrosion, but also by fuel contaminants, which form coatings with low electrical conductivity on the contact surface.

Properties
Removes corrosion products (oxides, sulfates, sulfides, carbonates).
Dissolves dirt, oil and tar contamination.
Recovers low voltage tap from electrical contacts.
Aerosol cans are equipped with a 360 ° valve (works in any position of the can) and an additional nozzle tube for ease of use.
Application
Tube contacts in the lighting system of cars, trucks, buses, trailers, vans, tractors ...
Snap-in connectors used to connect wires in the automotive sector.
Contact points in the connecting plugs used for branching electrical or electronic modules.
Fuse Clips
Circuit breakers.
Contacts stamped circuits.
Electronic push-pull connectors (connectors).
Cylindrical and spring-loaded contacts. Sleeve contacts or spring loaded contacts.