$14.00
On Hold
Adhesive for rear view mirrors ASTROHIM 2ml
10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Adhesive for rear view mirrors
Designed for bonding glass with various materials (metal, plastic, wood, etc.) under the influence of sunlight or UV light. The resulting adhesive joint has high strength and resistance to vibration.
Mode of application:
Clean the glued parts from the remnants of the old glue, sand with sandpaper, degrease and dry. Apply a small amount of glue to one of the surfaces to be bonded. Spread it evenly over the area to be glued. The bonding process must be carried out in the presence of daylight or when illuminated with a UV lamp. Connect the glass and the surface to be glued, press firmly. Setting time - 20 sec. in normal light. Remove excess glue with either a dry or solvent-dampened soft cloth immediately after bonding.
About 80% of the strength of the compound gains within 30 minutes, after which it can be subjected to stress. Maximum bond strength is reached after 24 hours.
Designed for bonding glass with various materials (metal, plastic, wood, etc.) under the influence of sunlight or UV light. The resulting adhesive joint has high strength and resistance to vibration.
Mode of application:
Clean the glued parts from the remnants of the old glue, sand with sandpaper, degrease and dry. Apply a small amount of glue to one of the surfaces to be bonded. Spread it evenly over the area to be glued. The bonding process must be carried out in the presence of daylight or when illuminated with a UV lamp. Connect the glass and the surface to be glued, press firmly. Setting time - 20 sec. in normal light. Remove excess glue with either a dry or solvent-dampened soft cloth immediately after bonding.
About 80% of the strength of the compound gains within 30 minutes, after which it can be subjected to stress. Maximum bond strength is reached after 24 hours.
RU, RUSSIAN FEDERATION