$12.30
On Hold
Glue-cold welding gas tank sealant ASTROHIM 55g
10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Glue-cold welding gas tank sealant
Designed for quick and reliable repair and sealing of gas tanks of cars, trucks, agricultural machinery made of plastic, ferrous and non-ferrous metals. Provides reliable repair on wet and oily surfaces, at low temperatures (up to -10 ° C, provided that the mixture is mixed in a warm room).
Mode of application:
The glued surfaces clean of dirt and rust, clean with sandpaper, degrease and dry. Cut the part of the rod necessary for volume and carefully mix both components with your fingers (you can wet) to obtain a uniform color of the mass. Apply the resulting mixture to the surface to be repaired and, if possible, press and fix for 15 minutes. When used on wet or oily surfaces, the mixture must be smoothed back and forth until it sticks to the surface (the bond strength is reduced by 20-25%). If it is necessary to repair at low temperatures, it is recommended to roll the ball from a thoroughly mixed composition and hold it in your hands until it warms up to 40-50 ° C (but not more than 4 minutes from the beginning of stirring), then apply to the area to be repaired. To smooth the surface and give it the necessary shape, use flat objects moistened with water.
ATTENTION! The pot life of the mixture is 5-7 minutes. at 20 ° C. Under conditions that ensure the removal of heat (thin layer, low temperature, etc.), the pot life increases, when heated, it decreases. The composition "sets" in 15 minutes at 20 ° C. At this time, mutual fixation of the connected parts is necessary. After 1-1.5 hours, the connection can be machined and loaded.
Designed for quick and reliable repair and sealing of gas tanks of cars, trucks, agricultural machinery made of plastic, ferrous and non-ferrous metals. Provides reliable repair on wet and oily surfaces, at low temperatures (up to -10 ° C, provided that the mixture is mixed in a warm room).
Mode of application:
The glued surfaces clean of dirt and rust, clean with sandpaper, degrease and dry. Cut the part of the rod necessary for volume and carefully mix both components with your fingers (you can wet) to obtain a uniform color of the mass. Apply the resulting mixture to the surface to be repaired and, if possible, press and fix for 15 minutes. When used on wet or oily surfaces, the mixture must be smoothed back and forth until it sticks to the surface (the bond strength is reduced by 20-25%). If it is necessary to repair at low temperatures, it is recommended to roll the ball from a thoroughly mixed composition and hold it in your hands until it warms up to 40-50 ° C (but not more than 4 minutes from the beginning of stirring), then apply to the area to be repaired. To smooth the surface and give it the necessary shape, use flat objects moistened with water.
ATTENTION! The pot life of the mixture is 5-7 minutes. at 20 ° C. Under conditions that ensure the removal of heat (thin layer, low temperature, etc.), the pot life increases, when heated, it decreases. The composition "sets" in 15 minutes at 20 ° C. At this time, mutual fixation of the connected parts is necessary. After 1-1.5 hours, the connection can be machined and loaded.
RU, RUSSIAN FEDERATION