$12.40
On Hold
Glue-cold welding heat-resistant ASTROHIM 55g
10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Glue-cold welding heat-resistant
Heat-resistant adhesive is designed for reliable bonding, repair, sealing of joints, as well as for the restoration of lost fragments of products from ferrous, non-ferrous metals and ceramics, operating at temperatures from -60 ° C to +250 ° C.
Mode of application:
The glued surfaces clean of dirt and rust, clean with sandpaper, degrease and dry. Cut the part of the rod necessary for volume and carefully mix both components with your fingers (you can wet) to obtain a uniform color of the mass. Apply the resulting mixture to the surface to be repaired and, if possible, squeeze and fix for 2-3 hours. To smooth the surface and give it the necessary shape, use flat objects moistened with water.
ATTENTION! The pot life of the mixture is 1.5 - 2 hours at 20 ° C. Under conditions that ensure the removal of heat (thin layer, low temperature, etc.), the pot life increases, when heated, it decreases. The composition "sets" in 2-3 hours at 20 ° C. At this time, mutual fixation of the connected parts is necessary. After 24 hours, the connection can be machined and loaded.
Heat-resistant adhesive is designed for reliable bonding, repair, sealing of joints, as well as for the restoration of lost fragments of products from ferrous, non-ferrous metals and ceramics, operating at temperatures from -60 ° C to +250 ° C.
Mode of application:
The glued surfaces clean of dirt and rust, clean with sandpaper, degrease and dry. Cut the part of the rod necessary for volume and carefully mix both components with your fingers (you can wet) to obtain a uniform color of the mass. Apply the resulting mixture to the surface to be repaired and, if possible, squeeze and fix for 2-3 hours. To smooth the surface and give it the necessary shape, use flat objects moistened with water.
ATTENTION! The pot life of the mixture is 1.5 - 2 hours at 20 ° C. Under conditions that ensure the removal of heat (thin layer, low temperature, etc.), the pot life increases, when heated, it decreases. The composition "sets" in 2-3 hours at 20 ° C. At this time, mutual fixation of the connected parts is necessary. After 24 hours, the connection can be machined and loaded.
RU, RUSSIAN FEDERATION