ENAMEL FOR BATH AND CERAMICS

Quick-drying acrylic enamel creates a snow-white glossy coating on the surface, restoring the surface to its original appearance. It has a fast drying speed and reduces the time for staining.

Enamel for bathtubs and ceramics VIXEN forms a durable wear-resistant coating, resistant to water and corrosion, as well as to atmospheric and mechanical influences. It has excellent adhesion to the painted surface, does not crack and does not exfoliate.

It is economical to use, as it has an increased cover.

Enamel is distinguished by good adhesion to the surface, without requiring preliminary priming. It lies evenly without drips with uniform coloring of vertical surfaces.

Enamel for bathtubs and ceramics is easy to use, easy to apply, does not require professional skills. The aerosol form of the package allows you to paint products of complex geometric shapes and paint hard to reach areas.

Consumption: 1 cylinder per 1.5-2.5 square meters. m depending on the number of layers.

Application area:
Designed for restoration of damaged enamel coatings and ceramics. Allows you to easily and quickly restore a worn-out old coating or repair minor damage to enameled bathtubs, washbasins, showers, ceramic tiles, refrigerators, washing machines and other items.

Application Features:
Before applying enamel, it is necessary to clean and degrease the surface. When painting a glossy surface, sand it. Dry the surface well, then degrease. To do this, we recommend using the VIXEN Universal Degreaser.

To avoid traces of enamel on surfaces that are not prone to staining, protect them with foil or paper.

To obtain high-quality coating, we recommend performing work at an ambient temperature of +10 to +30 ° C.

Shake the bottle vigorously for 2-3 minutes before use. Test the resistance of the painted surface to enamel in a small inconspicuous area. If the result is positive, apply “VIXEN Bath and Ceramic Enamel” from a distance of 25-30 cm in 2-3 layers, with intermediate drying for 10-15 minutes. The number of layers depends on the wear of the coating.

When painting large surface areas, periodically shake the bottle.

Drying time "on stick" at a temperature of +20 ° C is 10-15 minutes. Full drying time at a temperature of +20 ° C - at least 1.5 hours.

The product is allowed to operate after 24 hours after applying the top coat of enamel.

In order to avoid clogging of the spray head, it is recommended to turn the container upside down and spray at the end of work until clean gas flows.