ABRO MOTOR FLUSH 3-MINUTE 443ml

Highly concentrated liquid with special additives.
For gasoline and diesel engines with and without turbocharging, with an oil system volume of 3–6 liters.
In 3 minutes it qualitatively rinses and cleans the engine oil system of all types of deposits, sludge, engine wear products.
Allows you to do without the use of special flushing oils, extends the life of a new oil.
Helps improve engine performance.
Restores mobility of piston rings.
Improves heat dissipation.
Safe for oil seals and gaskets.
Prevents sticking of hydraulic lifters and hydraulic tensioners.
Mode of application:

1. Stop the engine for 10-15 minutes. Ensure that the oil level in the oil pan is optimal.
2. Pour the contents of the can into the oil neck.
3. Start the engine and let it run for 3 minutes at idle. It is strictly forbidden to drive a car with an engine flush filled in oil system.
4. Turn off the engine, drain the used oil, and remove the old oil filter.
5. Install a new oil filter and fill the oil recommended by the manufacturer to the required level.
For high mileage between engine rinses, oil changes, and also on worn engines, it is highly recommended that the sump pan be removed and thoroughly cleaned.