$25.00
On Hold
ABRO FOAMING CARBURETOR TUNE-UP & CONDITIONER 283g
10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Contains solvents and penetrating substances that remove tarry, hydrocarbon and other deposits from the fuel supply system.
Eliminates sticking of valves and occurrence of compression rings, removes deposits from combustion chambers.
Mode of application:
1. Warm up the engine to normal operating temperature.
2. Remove the air filter, let the engine idle (about 750 rpm).
3. Spray the contents of the entire cylinder directly into the carburetor, throttle, main throttle valve and shafts. Spray the cleaner on the walls of the chambers and on all contaminated surfaces. NOTE: after spraying, the engine speed will drop to 400-500 per minute, this is a normal reaction.
4. When the cylinder is empty, shut off the engine immediately.
5. Let stand for 5–10 minutes.
6. Start the engine, open and close the throttle in fast mode for 2 minutes.
7. Replace air filter.
8. If necessary, adjust airflow and idle.
Eliminates sticking of valves and occurrence of compression rings, removes deposits from combustion chambers.
Mode of application:
1. Warm up the engine to normal operating temperature.
2. Remove the air filter, let the engine idle (about 750 rpm).
3. Spray the contents of the entire cylinder directly into the carburetor, throttle, main throttle valve and shafts. Spray the cleaner on the walls of the chambers and on all contaminated surfaces. NOTE: after spraying, the engine speed will drop to 400-500 per minute, this is a normal reaction.
4. When the cylinder is empty, shut off the engine immediately.
5. Let stand for 5–10 minutes.
6. Start the engine, open and close the throttle in fast mode for 2 minutes.
7. Replace air filter.
8. If necessary, adjust airflow and idle.