AIR INTAKE & CARBURETTOR CLEANER (CARBURETOR CLEANER)
ALSO THROTTLE THROTTLE
Wynn's Air Intake & Carburettor is a cleaner designed to remove contaminants and deposits in the air ducts, jets and carburetor adjustment screws, as well as on all visible carburetor components.

Active solvents dissolve and remove dirt very quickly. Powerful atomization improves the cleaning effect. Cleans the carburetor and air intake system without disassembling. Dissolves resin, varnish and deposits.
APPLICABILITY
In the intake system of injection and carburetor gasoline engines.
On visible carburetor components (ventilation ducts, adjusting screws, flowmeter, external parts).
On throttle and throttle.
On crankcase ventilation valves.

DIRECTIONS
For carb
To clean visible components: Remove the air filter. Start the engine and let it warm up. Set the throttle to the open position. When the engine is warm, spray the product into the intake air manifold onto dirty components. Spray at intervals. If necessary, increase engine speed to avoid engine shutdown due to enrichment of the mixture. Continue until all components are clean.
Intake manifold / throttle
Remove the air filter, warm up the engine, set the throttle in the open position. With the engine warm, spray the product into the intake air manifold at intervals. Spray the product onto the throttle. If necessary, increase the engine speed to prevent the engine from stopping. If the injection system is equipped with an air flow valve, open the valve manually if necessary.
Automatically controlled choke
Remove the air cleaner. With the engine off, spray the product on both sides of the throttle using manual opening and closing.
P.V.K. (Forced Carter Ventilation)
Disconnect P.V.K. from the crankcase side. Insert the extension tube into the open part of the valve and spray the product while the valve is moving forward and backward. Start the engine, spray the product into the valve several times to completely flush it.