Automobile quick-drying, ground primer-putty of gray color with reinforcing filler.

Appointment: for processing metal surfaces before painting with various types of enamels with all types of drying. It can be used as a filler for putty. Allows subsequent grinding.

Action: due to the inclusion of finely dispersed filler, it provides maximum filling ability, well hides all microdefects and levels the surface.

It has high strength and good adhesion.
Effective corrosion inhibitors in the composition prevent rusting and inhibit the oxidation and aging of the treated surfaces.

Use at an ambient temperature of at least + 10 ° C. Prepare the primed surface. Remove rust, scale, old paint and dirt, degrease. The surface must be clean and dry. Protect the unprocessed surface from dust.

Strip the repaired areas of the body panels and the leveling putty layer with abrasive sandpaper No. 12–20.
Thoroughly mix the composition, shaking the balloon for 1-2 minutes until a clear knock of balls appears.
Apply 2–3 thin coats, spraying the primer in even strips from a distance of 20–30 cm. Each subsequent strip should overlap the previous 2–3 cm. The interval between coatings (intermediate drying) is 5 minutes.
Shake the bottle periodically during operation.
Avoid smudging.
After use, turn the spray can over and press the spray valve for 1–2 seconds to clean the nozzle.


Dry or wet sanding is allowed 30 minutes after applying the last coat of primer. Enamel can be stained after 6 hours of drying (at a temperature of about +20 ° C). Accelerated drying is allowed in a heat chamber (up to +100 ° С) or with drying lamps.