ABRO EPOXY STEEL 4-min 57g

Description:
two-component epoxy adhesive with a reinforcing additive of steel powder.

Scope of application:
It is used for chemical welding, filling, sealing and gluing wood, plastic and most metals, including brass, steel, copper, iron, etc.

Properties:
• setting time - 4 minutes;
• creates a heavy-duty connection;
• used as chemical welding;
• reliably glues parts and fills voids;
• contains steel powder;
• resistant to gasoline, antifreeze and most solvents;
• can be used for broken bicycles, cracked gearboxes, brake shoes, suction pipes, damaged keyways, cracks in the skin, cracked batteries, gas tanks;
• non-flammable;
• glued products can be operated at temperatures from -40 ° С to + 121 ° С.

1. Clean and degrease the surfaces to be bonded.
2. Remove the cap and pierce the foil in both tubes.
3. Squeeze out an equal amount of resin and hardener and mix thoroughly until smooth. The composition should be used within 4 minutes.
4. Apply a thin layer on the surfaces to be bonded. Gently squeeze the parts.