$15.00
On Hold
ABRO EPOXY STEEL 4-MINUTE 57g
10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Description:
two-component epoxy adhesive with a reinforcing additive of steel powder.
Scope of application:
Designed for bonding metals (copper, bronze, iron, brass, etc.), wood, plastic, glass, porcelain and ceramic parts.
Properties:
• high strength formula with the addition of steel powder;
• It is intended for chemical welding, filling, sealing and gluing of wood, plastic and most metals (brass, steel, copper, iron) during automobile, industrial and domestic works;
• instant setting in 4 minutes;
• has high resistance to gasoline, antifreeze and most solvents;
• the glued product can be polished, drilled, painted;
• fills voids and cracks, restores the shape and volume of the product.
1. Clean and degrease the surfaces to be bonded.
2. Remove the cap and pierce the foil in both tubes.
3. Squeeze out an equal amount of resin and hardener and mix thoroughly until smooth. The composition should be used within 4 minutes.
4. Apply a thin layer on the surfaces to be bonded. Gently squeeze the parts.
Recommended application temperature is not lower than 10 ° С.
two-component epoxy adhesive with a reinforcing additive of steel powder.
Scope of application:
Designed for bonding metals (copper, bronze, iron, brass, etc.), wood, plastic, glass, porcelain and ceramic parts.
Properties:
• high strength formula with the addition of steel powder;
• It is intended for chemical welding, filling, sealing and gluing of wood, plastic and most metals (brass, steel, copper, iron) during automobile, industrial and domestic works;
• instant setting in 4 minutes;
• has high resistance to gasoline, antifreeze and most solvents;
• the glued product can be polished, drilled, painted;
• fills voids and cracks, restores the shape and volume of the product.
1. Clean and degrease the surfaces to be bonded.
2. Remove the cap and pierce the foil in both tubes.
3. Squeeze out an equal amount of resin and hardener and mix thoroughly until smooth. The composition should be used within 4 minutes.
4. Apply a thin layer on the surfaces to be bonded. Gently squeeze the parts.
Recommended application temperature is not lower than 10 ° С.
RU, RUSSIAN FEDERATION