Gasket former No. 1 for
motorcycle equipment is a semi-liquid, with additives
solvents substance-gasket gray, on
based on elastomeric, silicone rubber,
which has particularly excellent
filling the gaps. Specially designed for
repair of motorcycles, private boats, snowmobiles and
off-road vehicles. MotoSeal 1
Former of gaskets No. 1 for motor vehicles
withstands high temperatures and
retains its effectiveness in interaction with
aggressive gasoline environment.
PRODUCT ADVANTAGES
• Resistant to aggressive effects of gasoline
• Withstands exposure to high temperatures
• Remains effective when exposed to low
temperatures
• Effective for repairing uneven surfaces
connections of parts
• Forms a strong, elastic film strip
• Resistant to aggressive chemicals
APPLIES
• As a gasket for the head cover
cylinders
• As a gasket for the engine crankcase cover
• As a gasket for the distribution housing
chain mechanism
• As a gasket for the gear housing
mechanism
• As a gasket for the center and end cover
(transmissions)
• As an exhaust manifold gasket
• As a gasket at the junction of the covers
cylinders
• As a gasket for outer (side) covers
• As a gasket for the coupling housing
APPLICATION INSTRUCTIONS
As a gasket former, finally
formed in working position
1. Remove remnants of old materials from
surface. For this purpose it is recommended
use Permatex gasket remover
,
suitable for most surfaces, for
exception, plastic and painted.
2. For best results
it is recommended to degrease the surface with
no residue and no solvent residue,
e.g. with a brake cleaner
"Permatex
Brake and Parts Cleaner ".
3. Apply MotoSeal 1 Pad Former No.
1 for motor vehicles in a continuous layer on both
surface.
4. Smooth the material over the surfaces with
small brushes.
5. Withstand the material on the surface for
one (1) minute and mount surfaces.
6. Tighten the bolts according to the individual
technical requirements for details.