Gasket Remover is an aerosol product designed to
remove gaskets and gasket residue from any type of metal or
plastic housing. The product will also remove chemical
formed-in-place gaskets. The Permatex Gasket Remover is
a safe alternative to the harsh, chlorinated and brominated
solvents found in many of today’s standard gasket removing
chemicals.
NOTE: This product is not recommended for use on silicone
gasket residue.
PRODUCT BENEFITS
 A safe alternative to chlorinated and brominated solvents
 Non-chlorinated, non-brominated
 Built in brush top to easily apply to gasket reidues
 Penetrates and cleans intricate shapes
 Will not run, even on vertical surfaces
 Eliminates excessive scraping and potential damage to
flanged surfaces
 Saves time and labor
TYPICAL APPLICATIONS
 Removes baked-on gaskets and gasket cements
 Removes formed-in-place gaskets
 Removes gaskets from aluminum without scraping
 Removes gaskets from small, difficult to reach areas
DIRECTIONS FOR USE
1. Provide adequate ventilation.
2. Protect painted and non-metal surfaces from overspray.
The product will remove paint.
3. Shake can well. For best results, the aerosol can
should be at room temperature before spraying.
4. Apply Gasket Remover by depressing pad to angle
brush. Using brush, spread Gasket remover over
gasket residue.
gaskets, allow to set for 20 to 30 minutes). Remove
dissolved gasket with a plastic scraper and rags. Reapply if necessary.
6. Prep flange for new gasket by cleaning with Permatex
Brake and Parts Cleaner.
For Cleanup
1. Clean hands with Permatex
brand hand cleaners.