$26.00
On Hold
PERMATEX 30 Minute High Strength General Purpose Epoxy 25ml
10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Epoxy Welding - Transparent
two-component epoxy adhesives.
Permatex® PermaPoxy ™ Transparent Multipurpose Epoxy Weld is an extra strong epoxy resin available in both fast curing and slow curing formulations. PermaPoxy ™ epoxies are ideal for
multi-component bonding of parts with different
physical properties. Water resistant
and solvent products are available in double syringes or tubes.
PRODUCT ADVANTAGES
• Does not shrink
• Various curing cycles
• No pressing of parts required
• Fills cracks
• Practically colorless
• Resistant to pressure and shock loads
• Waterproof
APPLICATION AREA
Bonds solid materials, including
• Chrome
• Plexiglass
• Glass
• Plastic
• Metals
INSTRUCTIONS FOR USE
1. Protect the treated area from accidental ingestion of the composition.
2. The surface must be clean, dry and free from
oils and grease.
3. Sand the surfaces with sandpaper or other
abrasives.
4. Cut off the tips of both nozzles with a sharp knife.
5. Push the syringe plunger or squeeze out of the tubes
equal amounts of resin and hardener. Mix resin and hardener thoroughly on a clean, hard surface
for at least one minute or until received
uniform color.
6. Apply to recoverable surfaces. Fast
collect the pieces. Remove excess epoxy immediately
resin.
7. Allow the resin to cure for the cure time before using the part.
two-component epoxy adhesives.
Permatex® PermaPoxy ™ Transparent Multipurpose Epoxy Weld is an extra strong epoxy resin available in both fast curing and slow curing formulations. PermaPoxy ™ epoxies are ideal for
multi-component bonding of parts with different
physical properties. Water resistant
and solvent products are available in double syringes or tubes.
PRODUCT ADVANTAGES
• Does not shrink
• Various curing cycles
• No pressing of parts required
• Fills cracks
• Practically colorless
• Resistant to pressure and shock loads
• Waterproof
APPLICATION AREA
Bonds solid materials, including
• Chrome
• Plexiglass
• Glass
• Plastic
• Metals
INSTRUCTIONS FOR USE
1. Protect the treated area from accidental ingestion of the composition.
2. The surface must be clean, dry and free from
oils and grease.
3. Sand the surfaces with sandpaper or other
abrasives.
4. Cut off the tips of both nozzles with a sharp knife.
5. Push the syringe plunger or squeeze out of the tubes
equal amounts of resin and hardener. Mix resin and hardener thoroughly on a clean, hard surface
for at least one minute or until received
uniform color.
6. Apply to recoverable surfaces. Fast
collect the pieces. Remove excess epoxy immediately
resin.
7. Allow the resin to cure for the cure time before using the part.