BRAKE CALIPER GUIDE LUBRICANT 30ml RUSEFF

Lubricant for brake caliper guides RUSEFF is a modern domestic product, a specialized high-temperature grease for servicing brake systems of any cars. Provides the mobility of the caliper parts, uniform wear of the pads, shortens the braking distance, increases the efficiency and safety of braking, and eliminates the squeak of the brakes.
The grease has the following properties:
- protection of rubber parts of the caliper from deformation;
- wide range of temperatures: from -50 ° С to + 200 ° С;
- anti-corrosion properties;
- protection of parts of the brake system from burning;
- resistance to water washout;
- protection against the effects of salt and dirt;
- does not interact with brake fluids class DOT 3, DOT 4, DOT 5.1
The lubricant for the RUSEFF brake caliper guides will remain on the surface when the car is operated in climatic conditions of any region of Russia: in severe frost on a road sprinkled with salt and reagents, and in a humid environment of subtropics, and in drier hot steppes.

There are several types of brake lubricants. Let's try to figure them out.
So, lubricants of the brake mechanism are designed to treat different parts of it and they can be conditionally divided into three types.
1. Lubrication of the brake pistons when assembling the mechanism.
2. Anti-squeak lubricants for non-working surfaces of brake pads and brake frames.
3. Lubricants for the guide pins, and this is our lubricant.
There are many requirements for the composition of this type of lubricant. Since the guides have rubber caps, and often also rubber and plastic bushings, the lubricant should not harm the rubber. In addition, it must withstand huge temperature fluctuations, not coke and not be afraid of moisture, have high water-repellent and protective-conservation properties.
It is not easy to meet all these parameters. Silicone based RUSEFF brake caliper slide grease with silica thickened silica gel is excellent in all conditions. Prevents souring of the guides, ensures even wear of the pads.

Specially formulated to lubricate guide pins in floating caliper brakes and to keep them moving. • The grease is resistant to water washout • Does not coke • Does not deform and destroy rubber boots • Protects the guides from corrosion • Heat and frost resistant grease

Apply a thin layer (0.1 mm) to the clean surface of the rails. Install the rails into the caliper.