Redline CV-2 is a synthetic molybdenum grease.


Description:
Red Line CV-2 grease withstands the extreme temperatures and loads that are constantly encountered in wheel bearings and CV joints. Excellent high temperature stability, less valve and friction wear, extreme load protection and water repellency, allow this product to outperform the best synthetic and mineral lubricants. This grease can be used in various fields at operating temperatures from -70 ° C to 260 ° C and provides excellent corrosion resistance, low evaporation rate and does not damage rubber seals and oil seals. The special synthetic formula extends the bearing life by 200-800%. Red Line CV-2 contains a red molybdenum component that outperforms conventional black molybdenum disulfide greases.

Red LIne CV-2 grease can also be used in industrial equipment such as high temperature generator bearings, high speed ball bearings, conveyor bearings, worm gears, and servo drives.

Red Line CV-2 grease will retain its properties even under very long exposure to high temperatures and loads. The life of the grease often exceeds the life of the lubricated parts. Red Line CV-2 grease may darken slightly after high temperature use - this does not in any way affect its performance. Despite the fact that Red Line grease is compatible in small quantities with many mineral greases, always thoroughly clean the lubricated surfaces of old grease to remove abrasive particles and to avoid grease incompatibilities.

Grease properties:

NLGI Grade: 2 (Medium Hardness)
NLGI Specification: GC-LB (Highest Quality Grade)
Thickener: non-soap
Liquid type: thermostable, synthetic
Operating temperature range: -70 ° С to 260 ° С
Color: Red
Dropping point ° С: 480+
Badass Index: 71.2
Seizure diameter in 4-ball test at 40 kg: 0.46 mm
Water washout @ 40 ° C: 1%
Evaporation loss, 22 hours @ 180 ° C: 4%
Oil separation, 30 hours @ 180 ° C% 5%
Oxidation resistance, 500 hours @ 99 ° C, bar: 0.8
Corrosion Test ASTM D1743: Pass