$41.00
On Hold
WURTH FAST adhesive sealant 300ml
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
white grey black
High degree of adhesion
Ideal for bonding and sealing ferrous metals, primed and painted metal sheets
High degree of stability
Perfectly leveled
Can be applied with a spatula or brush
It is possible to texture the seam surface
Short film formation time
The ability to form a seam
The joint can be painted a short time after the application of the compound
Approved for use with food (ISEGA certificate)
Safe for health in solid state
Safe for use in the food industry
Non-corrosive
Has a neutral odor
Does not contain silicone
Specifications
Base: one-component polyurethane
Density (DIN 53479): 1.14-1.20 kg / l
Application temperature: +5 ... + 35 ° C
Skin formation time: 20 min (at + 23 ° C and 50% humidity)
Curing speed: 3 mm in 24 hours (at + 23 ° C and 50% humidity)
Volume change (DIN 52451): ~ 6%
Shore A hardness (DIN 53505): ~ 40
Tensile strength (DIN 53504): 1.8 N / mm²
Elongation to break (DIN 53504):> 600%
Pull-off strength (DIN 53515):> 6 N / mm
Elongation, compression during operation: 10%
Volume resistivity (DIN 53482): ~ 10 GΩ cm
Glass formation temperature: ~ -45 ° С
Heat resistance: -40 ... + 90 ° C (within 8 hours up to +120 ° C)
Resistance to: water, seawater, lime water, waste water, weak acids and alkalis
Temporary resistance: to fuels, mineral oils, vegetable and animal fats
Mode of application
The surfaces to be bonded must be clean, dry and free from grease. The adhesive sealant which has not yet hardened can be removed with the cleaner art. 0890.100.63, cured sealant can only be removed mechanically.
Application area
Designed for reliable sealing of overlapped seams, contact welding spots, visible joints. Can be used outdoors. It is widely used in refrigeration units, refrigerators, air conditioning systems, and car body parts.
Attention!
Do not apply to alkyd varnishes. Not suitable for bonding polyethylene, polypropylene, Teflon, silicone rubber, expanded foam and plasticized plastics.
High degree of adhesion
Ideal for bonding and sealing ferrous metals, primed and painted metal sheets
High degree of stability
Perfectly leveled
Can be applied with a spatula or brush
It is possible to texture the seam surface
Short film formation time
The ability to form a seam
The joint can be painted a short time after the application of the compound
Approved for use with food (ISEGA certificate)
Safe for health in solid state
Safe for use in the food industry
Non-corrosive
Has a neutral odor
Does not contain silicone
Specifications
Base: one-component polyurethane
Density (DIN 53479): 1.14-1.20 kg / l
Application temperature: +5 ... + 35 ° C
Skin formation time: 20 min (at + 23 ° C and 50% humidity)
Curing speed: 3 mm in 24 hours (at + 23 ° C and 50% humidity)
Volume change (DIN 52451): ~ 6%
Shore A hardness (DIN 53505): ~ 40
Tensile strength (DIN 53504): 1.8 N / mm²
Elongation to break (DIN 53504):> 600%
Pull-off strength (DIN 53515):> 6 N / mm
Elongation, compression during operation: 10%
Volume resistivity (DIN 53482): ~ 10 GΩ cm
Glass formation temperature: ~ -45 ° С
Heat resistance: -40 ... + 90 ° C (within 8 hours up to +120 ° C)
Resistance to: water, seawater, lime water, waste water, weak acids and alkalis
Temporary resistance: to fuels, mineral oils, vegetable and animal fats
Mode of application
The surfaces to be bonded must be clean, dry and free from grease. The adhesive sealant which has not yet hardened can be removed with the cleaner art. 0890.100.63, cured sealant can only be removed mechanically.
Application area
Designed for reliable sealing of overlapped seams, contact welding spots, visible joints. Can be used outdoors. It is widely used in refrigeration units, refrigerators, air conditioning systems, and car body parts.
Attention!
Do not apply to alkyd varnishes. Not suitable for bonding polyethylene, polypropylene, Teflon, silicone rubber, expanded foam and plasticized plastics.