Base: cyanoacrylate
Color: transparent
Viscosity: 50 mPas
Density: 1.0 mg / cm³
Maximum clearance: 0.1mm
Temperature resistance: −30 ... + 85 ° C
Application temperature: +5 ... + 40 ° C
Full cure time: 24 hours
Flash point:> 93 ° C
Bonding time, s: - steel, aluminum: 60 ... 90 - polyacrylate, PVC: 20 ... 30 - neoprene, EPDM: 3 ... 9

Mode of application
The surfaces of the parts to be bonded must be clean, dry and free from grease. Apply adhesive sparingly and evenly to one of the surfaces. Connect the parts and press down to achieve full contact. Maintain the pressure until the required moment. Some metals, such as aluminum, copper and their alloys, must be sanded with an emery cloth before bonding to remove the oxide layer.

Application area
Designed for quick repair of metal products, a number of plastics, rubber and other materials in any combination.

Attention!

Vapors from cyanoacrylate adhesive can irritate mucous membranes. Only use adhesive in well-ventilated areas and wear protective gloves and goggles. Beware of getting glue on the skin of the hands, eyelids. Keep out of reach of children.