WURTH Spray for stainless surfaces Perfect 400ml

Reliable long-term protection against corrosion, gives the surface the appearance of stainless steel

Large protective layer in one pass
High resistance to weathering
Reliable protection
Excellent coverage
Can be applied to rust
Only surface corrosion is cleaned before use
Adjustable spray angle
Spraying possible on both large and small surfaces
Does not drain
High resistance to abrasion
Does not contain AOX

Specifications
Chemical basis: combined alkyd-acrylate composition
Color: stainless steel, chrome
Density: 1.06 g / cm³
Adhesion test (DIN 53151): GT0-1
Layer thickness in one pass, after drying: ~ 30 microns
Recommended layer thickness: 30 microns
Film appearance time (at the recommended layer): ~ 15 min
Complete drying time (at the recommended layer): 10-12 hours
Waiting time of the product before use (at the recommended layer): 20 minutes
Heat resistance: up to ~ + 240 ° C
Shelf life at temperatures from +10 ... + 25 ° C: 24 months
Suitable for exterior painting: yes (preliminary testing required)
Surfaces with good adhesion: metal, wood, paper, polycarbonate and polystyrene materials, PMMA

Mode of application
The surfaces to be treated must be clean, dry and free from grease. Remove rust and old paint residues, sand and clean the surface. Shake the can well before use for about two minutes. Spray onto the surface to be treated from a distance of 25-30 cm.

Application area
Restores and protects metal surfaces from corrosion, improves their appearance.

Attention!

Not to be used as a base for polyurethane, MS polymer and hybrid sealants.