Eliminates corrosion and dirt deposits in the cooling system
Restoring the nominal performance of the cooling system
Neutralizes limescale residues
New antifreeze protected from contamination
Weakly alkaline, pH in the range of 9-11
Compatible with all materials used in the construction of radiators
Compatible with all types of antifreeze

Mode of application
Add the contents of the bottle to the antifreeze in the cooling system. Open the expansion tank / radiator valve. Start the engine and let it run for about 30 minutes. Dissolved impurities must be removed from the system together with antifreeze. Refill with new antifreeze and check the system for leaks. It is recommended to replace system elements contaminated with penetrated oil, such as expansion tank and pipes. 250 ml of cleaner is sufficient for 10 liters of antifreeze, 1 liter is sufficient for 40 liters of antifreeze.

Application area
It is used when the cooling system is contaminated after repair, when oil enters the system due to damage to the cylinder block; when scale appears in the cooling system; as a preventive measure when replacing antifreeze.