$15.30
On Hold
Shrus-4 Sinteс grease 100ml
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Grease Sintec SHRUS-4 100 g Obninskorgsintez 632114 is produced by thickening a mixture of high quality petroleum oils with lithium soap of 12-hydroxystearic acid with the addition of additive packages that guarantee high antifriction, anticorrosive and antioxidant properties. Contains MoS2 molybdenum disulfide and PTFE filler.
Specifications:
Appearance: homogeneous ointment from dark gray to black;
Dropping point ° С: not lower than 190;
Penetration at 25 ° С, mm, 0.1 mm: 250-280;
Corrosion test on steel plates of grade St45 in accordance with GOST 1050-88: withstands;
Mass fraction of water,%: no;
Colloidal stability,%: no more than 16;
Ultimate strength, Pa (gf / cm2) at t:
at 20 ° C, in the range: 300-700;
at 80 ° C, within: 150;
Effective viscosity, Pa * s at -30 ° C with an average strain rate gradient of 10 s-1, Pa * s (P) no more: 1800;
Welding load, N: 4 900;
Evaporation at 120 ° С,% mass, no more: 4.5;
The presence of solid additives: MoS2, PTFE.
Specifications:
Appearance: homogeneous ointment from dark gray to black;
Dropping point ° С: not lower than 190;
Penetration at 25 ° С, mm, 0.1 mm: 250-280;
Corrosion test on steel plates of grade St45 in accordance with GOST 1050-88: withstands;
Mass fraction of water,%: no;
Colloidal stability,%: no more than 16;
Ultimate strength, Pa (gf / cm2) at t:
at 20 ° C, in the range: 300-700;
at 80 ° C, within: 150;
Effective viscosity, Pa * s at -30 ° C with an average strain rate gradient of 10 s-1, Pa * s (P) no more: 1800;
Welding load, N: 4 900;
Evaporation at 120 ° С,% mass, no more: 4.5;
The presence of solid additives: MoS2, PTFE.
RU, RUSSIAN FEDERATION