$14.53
On Hold
Adhesive for rear-view mirrors 2 ml AVS
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Photo-curable glue is intended for gluing glass with various materials (glass, metal, plastic, wood, etc.) under the influence of sunlight or the light of a UV lamp.
Method of application: Clean the adhesion areas from the remnants of old glue, sand with sandpaper, degrease and dry. Open the blister, take out a bottle of glue and apply a small amount of glue through a dropper onto one of the surfaces to be glued. Distribute it evenly over the area to be glued. The bonding process must be carried out in the presence of daylight or under illumination with the light of a UV lamp. Connect the glass and the surface to be glued, press firmly. Setting time - 20 sec., At normal illumination. Excess adhesive can be removed with either a dry or a soft cloth soaked in solvent immediately after bonding. The joint gains about 80% of its strength within 30 minutes, after which it can be loaded. The maximum bond strength is reached after 24 hours.
Method of application: Clean the adhesion areas from the remnants of old glue, sand with sandpaper, degrease and dry. Open the blister, take out a bottle of glue and apply a small amount of glue through a dropper onto one of the surfaces to be glued. Distribute it evenly over the area to be glued. The bonding process must be carried out in the presence of daylight or under illumination with the light of a UV lamp. Connect the glass and the surface to be glued, press firmly. Setting time - 20 sec., At normal illumination. Excess adhesive can be removed with either a dry or a soft cloth soaked in solvent immediately after bonding. The joint gains about 80% of its strength within 30 minutes, after which it can be loaded. The maximum bond strength is reached after 24 hours.
RU, RUSSIAN FEDERATION