Conductive glue on nickel is intended for repairing the heating threads of the rear window of a car with damage (breaks) of no more than two centimeters. The voltage supply of the busbar cannot be repaired with conductive adhesive.

Directions for use: Before applying, shake the contents of the bottle thoroughly with vigorous shaking. Separate the self-adhesive part of the stencil from the backing and stick it on the glass in the area of ​​the heating thread break so that the break point is in the middle of the stencil slot. Apply one layer of glue to the glass through the stencil with a brush immediately after mixing, after a minute, reapply the second layer of glue. After the glue line has dried (after about 60 minutes), peel off the stencil. Complete drying of the glue line occurs after 2 hours at an ambient temperature of at least + 20 ° C. One tube is enough to restore damaged threads with a total length of up to 20 cm.

Volume: 2 ml