PRIMER 3M 94 or, in other words, the adhesion promoter is a transparent liquid with a pungent odor.

This product, which has no complete functional analogs from other manufacturers, was developed by 3M, a world leader in the development and production of high-tech materials.

The main purpose of the primer is to enhance the adhesive effect of films, scotch tapes or other self-adhesive materials. Primer 3M 94 is an irreplaceable assistant when pasting a car with vinyl film! Not a single professionally done work can do without it.

All films for car styling have a self-adhesive base, everyone knows this. Why then a primer, you ask ?! When gluing the film to curved surfaces, it stretches strongly, its adhesive layer also stretches and becomes thinner, the film must be helped to stay on the surface to be glued in difficult conditions, for this we need Primer 3M! This is especially necessary when pasting concave surfaces. Having previously coated the glued surface with a primer, we reinsure ourselves against repeated work in such difficult areas as the stiffening ribs of the hood with a concave profile, complex-concave bumpers, places where glue alone is not enough. It should be remembered that the film loves to peel off at the edges of the parts, and to swell in the recesses, which is why it is advisable to use a primer.

Product description:

Primer ZM 94 can be used to increase adhesion to surfaces such as polyethylene, polypropylene, ABS, PET / PBT combination, concrete, wood, glass, metal and painted metal surfaces.

Transparent amber color, consumption - 14 ml / 0.2 m2, dries to a glossy finish.

Surface preparation:

The surface on which Primer ZM 94 is applied must be clean and dry. To clean contaminated surfaces, it is recommended to use a 1: 1 mixture of isopropyl alcohol and water.

Application:

Before using Primer ZM 94, it is necessary to shake well, then apply a thin uniform layer on the surface to be glued, using the minimum amount necessary for an even coating. Allow the composition to dry before pasting. This usually takes 5 minutes at room temperature. Make sure that the surface to which the Primer is applied is free from dirt and dust. Porous substrates may require reapplication to achieve uniform surface coverage and good adhesion. In this case, it is necessary to allow the first layer to dry and only then apply the second.
Primer ZM 94 can be applied with a brush or swab.
Isopropyl alcohol is used to remove Primer ZM 94.
Dries up very quickly.