TEROSON PU 8590 - High quality one-component polyurethane adhesive sealant for bonding windshields in the production process and in the service of vehicles. It has excellent adhesion to glass, ceramic coatings and painted surfaces in combination with the Teroson PU 8519 primer / activator. The material quickly cures under the influence of air moisture into an elastic-elastic material at a rate of 3-4 mm / 24 hours. With an increase in temperature and humidity, the curing process of the glue is accelerated; on the contrary, low air temperature and humidity slow down the process.
Vehicle readiness time (SDAT) for safe operation with airbags, according to Crash-Norm: FMVSS 208/212 (50 km / h, 100% frontal) - 8 hours.
The composition is characterized by good stability and resistance to blockage during glass application and installation.
It has an increased glazing time of 25 minutes, which reduces the probability of mistakes by the master and allows gluing large glass areas.
It is applied in a cold state, does not require heating, it is easily squeezed out with a hand gun
Retains high strength and elasticity even after long-term use.
Certified by OEM car manufacturers.
Scope of application: gluing windshield, rear and side windows into the bodies of cars, trucks and special vehicles, cabins of tractors, loaders, etc.
Glass gluing in 4 (without airbags) / 8 (with airbags) hours.