Flush the engine 5 minutes ODIS Motor Flush

Benefits
Increases the resource of freshly poured oil, improves its circulation, heat removal from engine parts.
Prevents sticking of valves and piston rings.
Promotes the formation of a stable and continuous oil film, which increases the engine's service life.
Application area

Engine flush 5-minute ODIS - for the oil system of internal combustion engines. It is used before changing engine oil to quickly and better dissolve carbon deposits, remove carbon and other contaminants from the channels of the lubrication system and the internal cavities of the engine with already used oil. safe for rubber products. Compatible with all types of oils and engines: gasoline, diesel, natural gas and LPG, including turbocharged ones.

Mode of application

1. Warm up the engine. 2. Stop the engine and fill the ODIS flush through the oil filler neck. 3. Start the engine and let it idle for 5 minutes. 4. Stop the engine and drain the used oil. 5. Replace the oil filter and fill with fresh oil. This package is designed for 4-6 liters of lubrication system. For larger or heavily contaminated systems, it is recommended to increase the flush volume (be careful with the flush dosage so as not to damage the oil seals and engine gaskets).

Precautions

Protect from direct sunlight and heating above 40 ° C! Do not use near open flames and hot objects! Do not disassemble or give to children! Do not breathe vapors and splashes! Avoid contact with inside, on exposed skin and in eyes! If swallowed, seek medical advice immediately. In case of contact with skin or eyes, rinse with water, if necessary consult a doctor. Store and use in a well-ventilated area, use skin, eye and respiratory protection. Avoid exposure to static electricity. Dispose of as household waste.

Ingredients: petroleum ether, 2-ethoxyethanol, detergents and corrosion inhibitors.

Expiration date: 5 years.