Appointment: Auto-sealant-gasket (formers of gaskets for repair use) -automotive silicone sealant of a neutral type, is a paste-like mass from white, beige to light gray and dark gray. Designed to eliminate leaks of water, antifreeze and oil in detachable joints instead of cardboard, cork and rubber gaskets, as well as to seal leaks.

Characteristics:

It has the ability to cure in air at room temperature and in contact with moisture in the air, passing from a pasty to a rubbery state;
Easily takes any shape, after hardening it retains strength and elasticity;
Not susceptible to cracking, shrinkage and leakage during temperature cycles;
Provides tight waterproof insulation;
Has no toxic properties;
Operating temperature range from -50 to +200 ° С

Application: Remove fragments of the old gasket and degrease the surface. Remove the cap and pierce the foil. Apply sealant along the perimeter to the entire mating surface, forming a layer no more than 2-3 mm thick (do not forget to leave holes for the fastening bolts and apply sealant so that after assembly, its excess does not get inside). After 20-30 minutes. collect the knot. Operation can be started after 4 hours (if the layer thickness is more than 1 mm, increase the exposure time). maximum strength is reached after 72 hours. Close the tube tightly after use.