3 pieces Additive for cleaning gasoline injection systems Pro-Line Benzin-System-Reiniger 0.5l

Final cleaning of gasoline power systems. It is applied through the tank after professional cleaning with the JetClean Plus apparatus. Reduces the content of CO and CH in the exhaust. The fluid has been tested for compliance with international CEC standards. Eliminates cold start problems, uneven idle, drop in power and throttle response, loss of ride smoothness, high content of toxic substances in the exhaust. Helps to soften and remove carbon deposits in combustion chambers, valves, pistons and rings. Does not affect rubber seals and hoses. It is also added to the cleaned fuel tank as a preventive measure.

Complex preparation for gasoline systems, additive to be added to the fuel tank. Mixes up with fuel and cleans the injection system and combustion chamber from deposits and impurities.

- Removes coke deposits and deposits from the dispenser and injection valves
- Effective for all fuel injection systems
- Accurate injection dosing and atomization
- Provides optimal driving mode and low fuel consumption
- Guaranteed low content of harmful substances in exhaust gases
- Increases operational reliability and economy

The use of Pro-Line Benzin-System-Reiniger allows for final cleaning of gasoline injection systems, and can also be used for the prevention of repairs.

For all petrol injection systems and carburetor engines. It is added to the cleaned fuel tank as a preventive measure, and after cleaning the injection system with the JetClean apparatus. When adding an additive to the tank, the amount of fuel must be at least 2/3 of the total volume (40 liters). Mixing with fuel is carried out automatically. The contents of the can is enough for a maximum of 70 liters of fuel.