$27.50
On Hold
4 pieces XADO ANTICARBON Antikoks 10ml
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
4 pieces XADO ANTICARBON Antikoks 10ml
Anticox - de-carbonization of piston rings
fast-acting agent for decoking stuck piston rings of gasoline and diesel engines
removes all carbon deposits and resin contamination from the cavities of the cylinder-piston group
after application does not require engine oil change
Restores the mobility of rings
Reduces oil consumption
Cleans cylinders and pistons, combustion chambers, valves from all types of contamination (carbon deposits, coke, varnishes, resins)
Equalizes compression across cylinders
Reduces engine noise
Removes deposits from spark plugs (glow plugs)
Reduces the level of harmful emissions into the atmosphere
Mode of application
1st stage: Warm up the engine. The motor should be warm, but not hot
2nd step: Unscrew the spark plugs (nozzles). Disconnect the ignition timing sensor connector, Hall sensor or switch
3rd stage: Add the contents of 1 tube one by one to each cylinder. Screw the candles back in. Wait 10-20 minutes. Unscrew the candles. Cover the spark plug holes with absorbent cloth to prevent escaping dirt from getting onto the paint. Crank the engine with a starter for a few seconds
4th step: Reinstall the spark plugs (nozzles)
5th stage: Start the engine and ensure its operation at an increased crankshaft speed for up to 15 minutes. During this time, the remains of the softened coke will be removed through the exhaust system
Dosage
1 tube - 1 cylinder.
Notes (edit)
Avoid contact with paintwork
Safe for catalytic converters, oxygen sensors, rubber products and seals
Can be used to flush the engine oil system:
Add the agent to the oil filler neck of the warm engine at the rate of 40 ml of the composition for 3-5 liters. oils
Ensure the engine idling for 10-15 minutes.
Change oil and oil filter
Anticox - de-carbonization of piston rings
fast-acting agent for decoking stuck piston rings of gasoline and diesel engines
removes all carbon deposits and resin contamination from the cavities of the cylinder-piston group
after application does not require engine oil change
Restores the mobility of rings
Reduces oil consumption
Cleans cylinders and pistons, combustion chambers, valves from all types of contamination (carbon deposits, coke, varnishes, resins)
Equalizes compression across cylinders
Reduces engine noise
Removes deposits from spark plugs (glow plugs)
Reduces the level of harmful emissions into the atmosphere
Mode of application
1st stage: Warm up the engine. The motor should be warm, but not hot
2nd step: Unscrew the spark plugs (nozzles). Disconnect the ignition timing sensor connector, Hall sensor or switch
3rd stage: Add the contents of 1 tube one by one to each cylinder. Screw the candles back in. Wait 10-20 minutes. Unscrew the candles. Cover the spark plug holes with absorbent cloth to prevent escaping dirt from getting onto the paint. Crank the engine with a starter for a few seconds
4th step: Reinstall the spark plugs (nozzles)
5th stage: Start the engine and ensure its operation at an increased crankshaft speed for up to 15 minutes. During this time, the remains of the softened coke will be removed through the exhaust system
Dosage
1 tube - 1 cylinder.
Notes (edit)
Avoid contact with paintwork
Safe for catalytic converters, oxygen sensors, rubber products and seals
Can be used to flush the engine oil system:
Add the agent to the oil filler neck of the warm engine at the rate of 40 ml of the composition for 3-5 liters. oils
Ensure the engine idling for 10-15 minutes.
Change oil and oil filter