Shoe glue nairite.

Designed for the manufacture and repair of shoes, leather goods, other products made of natural and artificial leather, leatherette, rubber, leather fiber, textile materials in any combination, gluing insoles and semi-insoles, gluing toes, covering heels. Ideal for natural leather and soles.
COMPOSITION: One-component cold curing adhesive based on chloroprene rubbers with a high crystallization rate, small additions of phenol-formaldehyde resin and reinforcing additives in a solvent mixture

PROPERTIES:
products glued with shoe glue are designed for operation in the temperature range from minus 40C to plus 70C.
special water resistance
high elasticity
self-adhesive ability
consumption 300 g/m2
adhesive density - 0.86 g / cm³.
yellow-green to beige color

MODE OF APPLICATION:
Apply an even layer of glue to the cleaned surfaces, apply a second layer after 10-15 minutes, dry for 10-12 minutes and then press firmly. The glued product can be used after 20 hours. The second method is the thermal activation mode: dry the glue line to dryness and heat it over an electric stove to 60 - 800C and then press it tightly. The glued product can be used after 1-2 hours. For porous materials, a two-time lubrication is used
Thermal activation method: Apply a thin layer of glue evenly on both prepared surfaces to be glued and dry for at least 30 minutes (from an hour or more to a day). friend for 10-20 seconds (flat surfaces can be rolled with a roller). Use the product after 2-4 hours.