$25.00
On Hold
ABRO CAST IRON ENGINE ENAMEL SPRAY PAINT AEROSOL TOUGH RESISTANT 400 ml
5 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
BLACK, BLUE, GRAY
When placing an order, write what color is needed.
Enamel paint for engine
This creates a durable coating that can withstand temperatures up to 260 ° C.
The unique formula with the addition of ceramic polymers increases heat transfer and protects the engine from overheating and exposure to automotive fluids.
Resistant to oils, automotive fluids, gasoline.
Specially designed for painting the engine block, air intake, crankcase, cylinder head cover, intake manifold and other engine parts
Mode of application:
1. Clean the surface of dirt, oil and grease with an ABRO® engine cleaner. Lightly sand the surface for better paint adhesion. Rinse with water and wipe with a clean cloth.
2. Protect surrounding surfaces from paint. For best results, stain at t from 18 ° C to 32 ° C and humidity not more than 70%. Do not use in direct sunlight.
3. Shake the jar for 1 minute after the ball pokes. Also shake the jar for 10 seconds after each minute of use.
4. Keep the balloon parallel to the paint at a distance of 20-25 cm and apply the paint in smooth, overlapping movements with thin layers. Wait 10 minutes before applying each next coat. Paint no more than an hour. The top layer begins to dry after 1 hour. Drying time 3 hours. Consumption 1 cylinder 1 - 1.3 m².
5. After application, clean the spray gun by turning the can over and blowing off the head until the ink stops. If the sprayer is clogged, clean it with solvent; do not pierce it with a needle.
When placing an order, write what color is needed.
Enamel paint for engine
This creates a durable coating that can withstand temperatures up to 260 ° C.
The unique formula with the addition of ceramic polymers increases heat transfer and protects the engine from overheating and exposure to automotive fluids.
Resistant to oils, automotive fluids, gasoline.
Specially designed for painting the engine block, air intake, crankcase, cylinder head cover, intake manifold and other engine parts
Mode of application:
1. Clean the surface of dirt, oil and grease with an ABRO® engine cleaner. Lightly sand the surface for better paint adhesion. Rinse with water and wipe with a clean cloth.
2. Protect surrounding surfaces from paint. For best results, stain at t from 18 ° C to 32 ° C and humidity not more than 70%. Do not use in direct sunlight.
3. Shake the jar for 1 minute after the ball pokes. Also shake the jar for 10 seconds after each minute of use.
4. Keep the balloon parallel to the paint at a distance of 20-25 cm and apply the paint in smooth, overlapping movements with thin layers. Wait 10 minutes before applying each next coat. Paint no more than an hour. The top layer begins to dry after 1 hour. Drying time 3 hours. Consumption 1 cylinder 1 - 1.3 m².
5. After application, clean the spray gun by turning the can over and blowing off the head until the ink stops. If the sprayer is clogged, clean it with solvent; do not pierce it with a needle.