Properties
Means for effective cleaning of DPF filters and catalysts without removal. Dissolves and removes all typical impurities from DPF filters and catalysts. Eliminates power loss and emergency conditions associated with contamination of DPF filters and catalysts. Restores engine power and improves engine dynamics.
The tool is also suitable for cleaning the EGR valve.
Discovers catalyst and promotes more efficient regeneration of the particulate filter
No disassembly of DPF filter / catalyst required
Evaporates without residue
Application area
For efficient cleaning of DPF filters and catalysts without removal.
Mode of application
Establish access to the filter by removing in most cases a temperature or pressure sensor or lambda probe in front of the DPF filter / catalyst. Directly through a flexible spray probe introduced into the hole at the inlet of the DPF filter / catalyst, spray the agent (with the engine turned off) in several intervals of 5 seconds with a pause of 5 seconds until the foam at the inlet is visible. Then take out the spray probe and mount the removed sensor. When processing a particulate filter, the soot formed on it dissolves into microparticles, contributing to its burning during the regeneration of the filter. At the end of the processing, start the forced regeneration of the DPF filter using the diagnostic tester. Then read and erase the error codes. Following this, conduct a 20-minute test drive on the track. The tool is applicable to all particulate filters of the closed type. In this case, before using it, check the engine oil level. If diesel oil enters the engine oil, replace it.
Before use, the contents of the package should be shaken vigorously for 1 minute!