Glue for glass and metal

Simple application
Fast and reliable installation due to instant adhesive adhesion
Adhesive bond resistant to shock and vibration
Long lasting, durable connection between glass and metal
Excellent chemical resistance
Resistance to dilute acids and alkalis, water and alcohol
Solvent free adhesive

Application area
Designed for bonding rear-view mirrors, cams and hinges to turning windows, rain sensors, bonding glass to metal.

Mode of application
Thoroughly clean and dry the surfaces intended for gluing (it is recommended to use a cleaner art. 0893.140). Apply an activator on the cleaned glass surface, and glue on the metal surface. Press the metal surface against the glass for about 20 seconds. After 15–20 minutes, the obtained adhesive joint can withstand 50% of the load; it takes about 12 hours to fully harden.

Attention!
Do not glue in direct sunlight or with a heated glass surface. The surfaces to be glued must be flat. Glue does not have the property of filling gaps.

Not suitable for use in furniture manufacturing.

Specifications
Base: urethane acrylate
Color: yellow, after drying - colorless
Density at 20 ° C: 1.08 g / ml
Flash point:> 100 ° C
Operating temperature: 5 ... 40 ° C
Heat resistance: −55 ... + 120 ° C
Drying time: about 12 hours at a temperature of +23 ° C and relative humidity of 55%
Initial Stall Effort: 20 Nm