The preparation TOTEK MK-01 is intended to increase the strength of the oil film, increase its flash point and increase the base number, enhance the antiwear and extreme pressure properties of the oil (tribological characteristics) and the HTHS parameter. Helps to increase the strength of the oil film, protects the thickener from premature destruction under the influence of mechanical and thermal stress. It must be used to enhance the working properties of the oil in cases where the car is operated under increased loads, when driving on the highway at high speed and with a large load. In cases where the engine oil has reduced protective properties, when you have no time to change the engine oil, and current affairs require you to continue driving your car when you take part in your road car in sports competitions. Also for use in sports motors in order to increase the strength of the oil film.
Method of application Turn off the engine, which has reached the operating temperature, check the oil level according to the instructions, record the location of the meniscus of the oil level on the dipstick in the journal. Use a sensory test to control the strength of the oil film. Rub a drop of oil from the dipstick between your fingers and remember the sensations before and after the introduction of the drug, open the oil intake, smell - remember the smell. Warm TOTEK MK-01 to room temperature 23-25 ​​° C through the oil intake neck into the engine at the rate of 50 ml of the drug per 1 liter of engine oil in the crankcase of your car. Close the oil intake, start the engine, let it idle for 5 minutes. Stop the engine, let the oil drain into the crankcase and check the level.