$28.50
On Hold
The remove carbon from piston engine EXPRESS LAVR 400 ml
More than 10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Raskoksovka engine EXPRESS, 400 ml
A product - that will change your understanding of sizing technology. Using this drug, you can forget about changing the oil and other costs associated with cleaning.
Dismantling an engine is now as easy as replacing a wheel on a car.
The high-speed formula is specially created to effectively solve the problem of coking piston rings of gasoline and diesel engines.
Shake well before use! Use at cylinder temperature above + 15C.
Warm up the engine to a temperature of +70 ° C
Turn off the ignition system. Remove the spark plugs on the gas engine and the glow plugs or nozzles on the diesel engine.
Using an extension tube, spray the compound (up to 3 seconds) into each cylinder.
Tighten candles (nozzles) and wait 15 minutes.
Unscrew candles (nozzles). Cover the technological holes with a thick cloth and crank the engine with the starter for 5-10 seconds. Remove residue from surfaces with a dry cloth.
Install dismantled components and parts. Make sure the assembly is correct.
Start the engine and let it run for 10 minutes, periodically gradually increasing the speed to 1500 - 2500 rpm.
A product - that will change your understanding of sizing technology. Using this drug, you can forget about changing the oil and other costs associated with cleaning.
Dismantling an engine is now as easy as replacing a wheel on a car.
The high-speed formula is specially created to effectively solve the problem of coking piston rings of gasoline and diesel engines.
Shake well before use! Use at cylinder temperature above + 15C.
Warm up the engine to a temperature of +70 ° C
Turn off the ignition system. Remove the spark plugs on the gas engine and the glow plugs or nozzles on the diesel engine.
Using an extension tube, spray the compound (up to 3 seconds) into each cylinder.
Tighten candles (nozzles) and wait 15 minutes.
Unscrew candles (nozzles). Cover the technological holes with a thick cloth and crank the engine with the starter for 5-10 seconds. Remove residue from surfaces with a dry cloth.
Install dismantled components and parts. Make sure the assembly is correct.
Start the engine and let it run for 10 minutes, periodically gradually increasing the speed to 1500 - 2500 rpm.
RU, RUSSIAN FEDERATION