$34.00
On Hold
HI-GEAR RUST STOP PRIMER SANDABLE gray 311g
10 available
Details
Shipping: US-Mainland: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Automotive quick-drying, polished, anti-corrosion primer for all types of paint.
Appointment: for processing metal surfaces before painting with various types of enamels with all types of drying. It is also used for body repair as a filler for putty.
Action: differs in good adhesion to metal and coatings (enamels, putties). Due to the content of corrosion inhibitors and functional fillers, it has high anticorrosive properties. Allows subsequent grinding.
Use at an ambient temperature of at least + 10 ° C. Prepare the primed surface: remove rust, scale, old paint and dirt, degrease. The surface must be clean and dry. Protect the unprocessed surface from dust.
Thoroughly mix the composition, shaking the balloon for 1-2 minutes until a clear knock of balls appears.
Apply 2–3 thin coats, spraying the primer in even strips from a distance of 20–30 cm. Each subsequent strip should overlap the previous 2–3 cm. The interval between coatings (intermediate drying) is 5 minutes.
Shake the bottle periodically during operation.
Avoid smudging.
After use, turn the spray can over and press the spray valve for 1–2 seconds to clean the nozzle.
Dry or wet sanding is allowed 30 minutes after applying the last coat of primer. Enamel can be stained after 6 hours of drying (at a temperature of about +20 ° C). Accelerated drying is allowed in a heat chamber (up to +100 ° С) or with drying lamps.
Appointment: for processing metal surfaces before painting with various types of enamels with all types of drying. It is also used for body repair as a filler for putty.
Action: differs in good adhesion to metal and coatings (enamels, putties). Due to the content of corrosion inhibitors and functional fillers, it has high anticorrosive properties. Allows subsequent grinding.
Use at an ambient temperature of at least + 10 ° C. Prepare the primed surface: remove rust, scale, old paint and dirt, degrease. The surface must be clean and dry. Protect the unprocessed surface from dust.
Thoroughly mix the composition, shaking the balloon for 1-2 minutes until a clear knock of balls appears.
Apply 2–3 thin coats, spraying the primer in even strips from a distance of 20–30 cm. Each subsequent strip should overlap the previous 2–3 cm. The interval between coatings (intermediate drying) is 5 minutes.
Shake the bottle periodically during operation.
Avoid smudging.
After use, turn the spray can over and press the spray valve for 1–2 seconds to clean the nozzle.
Dry or wet sanding is allowed 30 minutes after applying the last coat of primer. Enamel can be stained after 6 hours of drying (at a temperature of about +20 ° C). Accelerated drying is allowed in a heat chamber (up to +100 ° С) or with drying lamps.
RU, RUSSIAN FEDERATION