3 pieces PROTEC DPF Catalyst Cleaner 400ml

Properties
Means for effective cleaning of DPF filters and catalysts without removing. Dissolves and removes all typical contaminants from DPF filters and catalysts. Eliminates power loss and emergency modes associated with contamination of DPF filters and catalysts. Restores engine power and improves engine dynamics.
Also suitable for cleaning the EGR valve
De-carbonizes the catalyst and promotes more efficient regeneration of the particulate filter
Does not require disassembly of DPF filter / catalyst
Evaporates without residue
Application area
For effective cleaning of DPF filters and catalysts without removal.

Mode of application
Establish access to the filter by removing in most cases the temperature or pressure sensor or lambda probe in front of the DPF filter / catalytic converter. Spray the agent directly through the flexible spray probe inserted into the DPF / catalyst inlet opening (engine off) at several intervals of 5 seconds with a pause of 5 seconds until no foam is visible at the inlet. Then remove the spray probe and fit the removed sensor. When the particulate filter is treated, the soot formed on it dissolves into microparticles, contributing to its burning out during the filter regeneration. At the end of the treatment, start forced regeneration of the DPF filter using the diagnostic tester. Then read and erase the error codes. Followed by a 20-minute test drive on the track. The product is suitable for all closed-type particulate filters. In this case, before using it, check the engine oil level. If diesel fuel gets into the engine oil, replace it.

Before use, the contents of the package should be shaken vigorously for 1 minute!